Accessories SSD Storages Storage

Details specifications and analysis of the SSD storage devices

It is a species of hard drive but with other types of memory and above all, much faster than a traditional, that removes all the mechanical parts caused by the slow pace of reading information.
Details specifications and analysis of the SSD storage devices
SSDS can be manufactured with different architectures, but it is more common to use NAND memories, which is of two types: Single Level Cell (SLC) or Multi Level Cell (MLC) based on the structures of the used memory modules.
Single Level Cell uses one bit for each cell (0 or 1) and Multi Level Cell uses two (00, 01, 10 and 11). In this last is that there could be more errors.
Experts say that the SLC are better, but also more expensive and the MLC are those most used in the domestic sphere.
The connection interface is available for almost anyone to transmit data as SATA and PCle, which are the most interesting and standards.
The functioning of the SSD is equal to a traditional hard drive and develops the firmware and operating system.
Some incompatibility issues can occur with computers that have more than five years and which do not meet current standards of connectivity.
They come in two sizes: 1.8 or 2.5-inch, the latter is the most common and can be installed on almost any computer or laptop on the market.
The main advantages are: If there is loss of current continuous to being stored information, so it would not lose anything, not like it occurs in other devices.
In addition, it is quite faster than a traditional disk: it is normal to double or even triple performance: 100 to 300 MB per second.
We recommend using an SSD as a device to store the operating system, as well as other programs or files to take full advantage of the speed of transfer.

Leave a Comment

You may also like